EZ Degreaser is a concentrated, heavy-duty cleaner degreaser that is formulated to remove grease, oil, and dirt quickly and easily while rinsing - without leaving a film or residue.
EZ Degreaser is excellent at degreasing machinery and concrete shop floors. It can be diluted with water up to 32:1 (4 ounces per gallon) and used to remove grease, oil, and dirt while rinsing.
If used through a pressure washer, it should be diluted 20:1 (6 ounces per gallon of water), then rinsed with clear water. EZ Degreaser can also be used in heated dip/soak tanks.
View Label View SDS
Directions: DO NOT ALLOW PRODUCT TO DRY ON SURFACE. Pressure Washing: Dilute 20:1 with water, adjusting dilution as needed. Allow to soak for 2-3 minutes, then rinse thoroughly with water. Degreasing Engines and Machinery: Dilute 15:1 to 20:1 with water, adjusting dilution as needed. Allow to soak for 1-3 minutes, then rinse thoroughly with water. Concrete Shop Floors: Dilute with 8 oz per gallon of water. Soak floor with solution, scrub if needed, remove solution with squeegee/wet vac, then rinse well. Soak Cleaning: Mix 1 to 2 cups of EZ Degreaser per gallon of water in tank. (Tank may be heated to 180 degrees F if desired). Do NOT use with aluminum, galvanized steel or other non-ferrous metals.
Safety: Causes skin irritation. Causes serious eye irritation. Wash hands thoroughly after handling. Wear protective gloves/eye protection. IF ON SKIN: Wash with plenty of soap and water. IF skin irritation occurs, get medical advice/attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention.
Ingredients: Water (7732-18-5), 2-Butoxyethanol (111-76-2), Sodium Metasilicate (6834-92-0), Tall Oil Fatty Acid (61790-12-3), Sodium Tripolyphosphate (7758-29-4), Surfactants.
Stains: Grease, Dirt, Oil
Surfaces: Machinery, Concrete Shop Floors, Pressure Washers, Heated Dip/Soak Tanks